DH270 – Robust Mini-PC med HDMI 2.0
Denne tynde mini-pc på kun 43mm, råder over et enormt udvalg af forbindelser og kombinerer disse med en stærk computerkraft, og et selvsikkert, særligt robust udseende. Helt flydende 4K-gengivelse med 60 billeder via HDMI 2.0, en praktisk USB type C-tilslutning, 2x Gigabit Ethernet, kortlæser og serielle grænseflader er kun begyndelsen.
XPC Barebone DH270 understøtter de aktuelle Intel Core-processorer, 32GB DDR4 og tilbyder i alt 3 tilslutninger til skærme. Indvendigt supplerer de to M.2-porte og et 2,5″ diskdrev hinanden optimalt. Der medfølger et VESA-beslag til væg- og skærmmontering.
- Understøtter de aktuelle Intel Core processorer
- HDMI 2.0 til flydende 4K-gengivelse ved 60 HZ
- To diskdrev: 1x NVME SSD, 1x 2,5″ HDD
- 2x Gigabit Ethernet – Kan opgraderes til WLAN
- Altid tændt og fjernbetjent start-funktion
- Klarer omgivelsestemperaturer på op til 50 grader celcius
This 43 mm thin Mini-PC boasts a huge variety of connectors, combines this with high computing power and a bold, particularly robust appearance. Completely fluent 4K playback with 60 images via HDMI 2.0, a practical Type-C USB port, 2x Intel Gigabit Ethernet, card reader and serial interfaces are just the start. The XPC slim Barebone DH270 supports the latest Intel Core processors, 32 GB of DDR4 and features a total of three monitor ports. The two M.2 slots and one 2.5” drive are the perfect addition on the inside. The device yet includes a VESA bracket for wall and monitor mounting.
Se flere produktspecifikationer på shuttle.eu/DH270
|Chassis||Black chassis made of steel
Dimensions: 190 x 165 x 43 mm (LWH) = 1.35-litre
Weight: 1.3 kg net and 2.04 kg gross
Two holes for Kensington Locks and numerous
threaded holes (M3) at both sides of the chassis
|Operation System||This system comes without operating system.
It is compatible with Windows 10 and Linux (64-bit).
Note: Windows 7 is only supported in combination with 6th generation Intel Core
For an additional note on Windows 7, please see 
|Mainboard / Chipset / BIOS||Chipset: Intel® H270 Chipset (code name "Union Point")
Platform Controller Hub (PCH) as Single-Chip-Solution
AMI BIOS in 8 Mbit EEPROM with SPI interface
All capacitors are high quality solid capacitors
Supports hardware monitoring and watch dog functionality
Supports Unified Extensible Firmware Interface (UEFI)
Supports power on after power failure 
Supports Firmware-TPM (fTPM) Version 2.0
|Power Adapter||External 90 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz
Output: 19 V DC, 4.74 A, max. 90 W
DC Connector: 5.5/2.5 mm (outer/inner diameter)
Remark: The DC-input of the computer supports an external power source with either
12V±5% or 19V±5%.
|Processor support||Socket LGA 1151 (H4) supports
Intel Core i7 / i5 / i3, Pentium and Celeron processors
- 6th generation, code name "Skylake"
- 7th generation, code name "Kaby Lake"
Maximum supported processor power consumption (TDP) = 65 W
14 nm process technology, up to 8 MB of L3 cache
Not compatible with Intel Xeon E3 V5 processors for socket LGA 1151 and processors
with the older Socket LGA 1150.
Does not support the unlock-function of Intel K-Series processors.
The processor integrates PCI-Express, memory controller and the graphics engine on
the same die (performance features depending on processor type)
Please refer to the support list for detailed processor support information at
|Processor cooling||Heatpipe processor cooling with two 60 mm fans on the upper side of the chassis|
|Memory support||2x SO-DIMM slot with 260 pins
Supports DDR4-2133/2400 (PC4-17066/19200) SDRAM at 1.2 V
Supports maximum total size of 32 GB (max. 16 GB per module)
Supports Dual Channel mode
Supports two unbuffered DIMM modules (no ECC)
|Integrated Graphics||The features of the integrated graphics function
depend on the processor type used.
Three digital video outputs: 1x HDMI 2.0 und 2x HDMI 1.4b
- supports up to three independent displays simultaneously
- HDMI 1.4b supports 4K UHD resolution at 30 Hz (2160p/30)
- HDMI 2.0 supports 4K UHD resolution at 60 Hz (2160p/60)
- supports Blu-ray (BD) playback with HDCP
- supports HD video plus multi-channel digital audio via a single cable
Optional analog D-Sub/VGA video output
|2,5" Storage Bay||1x 6.35 cm / 2.5" storage bay supports one hard disk or SSD drive
Device height: 12.5 mm (max.)
1x Serial-ATA III connector, max. 6 Gb/s (600 MB/s) bandwidth
With Serial-ATA power connector (onboard)
|Two M.2 Slot||This XPC features two M.2 expansion slots:
(1) M.2 2280 BM slot
- Interfaces: PCI-Express Gen. 2.0 X4 (max. 16 Gbit/s) and SATA v3.0 (max. 6 Gbit/s)
- supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280)
- supports SATA SSDs (BM-Key) or PCIe SSDs (M-Key)
(2) M.2 2230 AE slot
- Interfaces: PCI-Express Gen. 2.0 X1 und USB 2.0
- supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
- supports an optional WLAN card (accessory WLN-M
|Audio||Audio Realtek® ALC 662 5.1 channel High-Definition Audio
Two analog audio connectors (3.5 mm) at the front panel:
1) 2-channel line out (headphones)
2) microphone input
Digital multi-channel audio output: by HDMI.
|Dual Gigabit LAN Controller||Dual network with two RJ45 ports
Used network chips:
2x Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
Supports Teaming mode
|Card Reader||Integrated card reader
Supports SD, SDHC and SDXC memory flash cards
Supports boot up from SD card
|Front Panel connectors||Microphone input
Audio Line-out (headphones)
2x USB 3.0 type A
1x USB 3.0 type C
SD card reader
Power LED (blue)
HDD LED (yellow)
|Back Panel connectors||1x HDMI 2.0 (supports UltraHD resolution at 60 Hz)
2x HDMI 1.4b
(with two screw holes for HDMI connector with locking screws)
Optional 1x D-Sub VGA connector (Accessory PVG01 )
4x USB 2.0
2x Gigabit LAN (RJ45)
2x RS232 serial port, 9-pin D-Sub (5/12 V, 1x RS422/RS485) 
DC-input connector for external power adapter
4-pin connector (2.54 mm pitch) supports
- external power on button
- Clear CMOS function
- 5 V DC voltage for external components
2x perforation for optional Wireless LAN antennas
2x hole for Kensington Locks (at the side)
|Other onboard connectors||1x jumper JP2 – power-on-after-power-fail (hardware solution) 
1x analog VGA graphics output CN6 (2x 10-pin, 1 mm pitch) 
2x serial interface (COM) occupied by back panel connectors
1x fan connector (4-pin) occupied by cooling system
1x connector for CMOS battery (occupied)
1x audio connector (line-out/microphone, 2x 7-pin)
|Supplied Accessories||Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)
VESA mount for 75/100mm standard (two metal brackets)
Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)
Four screws M4 x 10 mm (to affix VESA mount on the PC)
Four screws M3 x 4 mm (to mount a 2.5" drive into the bay)
Driver DVD (Windows 10 64-bit)
Serial ATA cable for 2.5" drive including power cable
External 90 W power adapter with power cord
Protection cap for CPU socket (do not use, if heatpipe or fan is mounted)
|Optional Accessories:||(1) WLN-M: Wireless LAN kit consisting of a M.2-2230 WLAN card, two antennas and
appropriate cables. Supports IEEE 802.11b/g/n/ac in the 2.4 / 5 GHz band and
Bluetooth 4.0. 
(2) PVG01: optional D-Sub VGA video output 
|Environmental Specifications||Operating temperature range: 0~50 °C 
Relative humidity, non-condensing: 10~90 %
|Conformity/Certifications||EMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI
Other: RoHS, Energy Star, ErP
This device is classed as a technical information equipment (ITE) in class B and is
intended for use in living room and office. The CE-mark approves the conformity by the
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
|Footnotes:|| Installation of Windows 7
The Intel® 100/200 chipset series does no longer support the Enhanced Host Controller Interface (EHCI) which is the
driver software for USB 2.0. The new chipset only supports the updated Extensible Host Controller Interface (xHCI for
USB 3.0) which is not supported by the original Windows 7 installation disk. This means, that peripheral devices
connected by USB (like keyboard, mouse and external optical drive) will not work during the Windows 7 Installation.
As a solution, please add the required USB 3.0 drivers to the Windows 7 installation files - this procedure is
explained in the Shuttle FAQ section at http://go.shuttle.eu/skylakewin7en.
Note: Windows 7 is only supported with processors of the 6th generation (Skylake), not with processors of the 7th
generation (Kaby Lake).
 HDMI output supports DVI-D with optional adapter
 Optional D-Sub/VGA connector
The mainboard features one analog graphics port CN6 on the mainboard. This signal can be lead to the outside
as a 15-pin D-Sub VGA connector at the backpanel by using an optional adapter PVG01. However doing so means
one serial port (COM) less can be used at the backpanel.
The BIOS setup provides a "Power-on-after-power-fail" function that can be found under "Power Management
Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1)
unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this
function, it may fail after short power failures. This is why the DH270 also comes with a hardware-based solution. By
removing Jumper JP2 (on the mainboard behind the power button), the system will start unconditionally once
power is supplied.
 Teaming Mode
The teaming function allows you to group both available network adapters together to function as one single
adapter. The benefit of this approach is that it enables load balancing and failover.
Driver download: https://downloadcenter.intel.com/download/21642
 Serial Ports
This PC features two serial RS232 ports with 9-pin D-Sub connectors at the back panel. The left COM port (COM1)
can also be configured as RS422 and RS485 in the BIOS setup. The COM ports are protected by black plastic caps.
Pin 9 of the D-Sub COM-Port is a multi-functional signal. Based on the Jumper JP1 configuration on the mainboard,
it can be configured as Ring Indicator (RI) or external power supply with a voltage level of either 5 V or 12 V. Each
COM port can be configured separately. The maximum current is 500 mA per connector.
 Optional Wireless LAN module
This Shuttle XPC slim Barebone supports the optional Shuttle XPC Accessory WLN-M which consists of a M.2-2230
card with IEEE 802.11ac and BT4.0 functionality and two external antennas with appropriate antenna cables.
 Notice - operating temperature
For ambient temperatures over 40 °C we strongly recommend to use SSDs (supporting at least 70 °C) and rugged
SO-DIMM memory modules with a temperature range of up to 95 °C.