Shuttle Mini PC with heatpipe cooling for LGA1151 “Skylake” processors
The Shuttle XPC Barebone SH170R6 packs the 6th Generation of Intel Core desktop processors for LGA1151 socket into an elegant, fresh case design. The aluminium case cover with a black-brushed surface has a volume of 14 litre which is just a third of the volume of a standard Midi tower. Despite its small dimensions, it is brimming with features. Set up a top-performer with the latest LGA1151 “Skylake” processor, a dual-slot PCI Express graphics card, M.2-SSD, two 6 TB hard disks in RAID mode and up to 64 GB of DDR4 memory, plus Blu-ray drive. However, also cost-effective configurations without dedicated graphics cards are possible, since Intel’s Skylake generation offers an amazing inbuilt CPU and graphics performance with low energy consumption.
|Chassis||Black aluminium chassis
Front panel: glossy plastic with horizontal line textures
Storage bays: 1 x 5.25" (external), 2 x 3.5" (1x internal, 1x external)
Using the optional accessory PHD3 two 2.5" drives
can be installed into one 3.5" bay.
Front doors for I/O ports and storage drives
Kensington Security Slot at the back panel (also called K-Slot
or Kensington lock) as a part of an anti-theft system
Dimensions: 33.2 x 21,6 x 19.8 cm (LWH), 14.2 litre
Weight: 3.5 kg net / 5.0 kg gross
|Mainboard / Chipset||Shuttle "FH170", Shuttle Form Factor
proprietary design for XPC cube Barebone SH170R6
Dimensions: 270 x 195 mm
Chipset: Intel® H170 Chipset
(Intel® DH82H170 PCH, code name "Sunrise Point")
Platform Controller Hub (PCH) as Single-Chip-Solution
Solid Capacitors for sensitive areas provide excellent
heat resistance for enhanced system durability
|BIOS||AMI BIOS, SPI Interface, 32 MBit Flash-ROM with SPI interface
Supports PnP, ACPI 3.0, Hardware Monitoring
Supports Unified Extensible Firmware Interface (UEFI)
Supports boot up from external USB flash memory
|Power supply||Built-in 300 Watt mini switching power supply (Shuttle PC61J)
AC input voltage: supports 100~240V, 50~60 Hz
80 PLUS® Bronze compliant: the PSU provides at least
82/85/82% of efficiency at 20/50/100% of load.
Active PFC circuit (Power Factor Correction)
ATX main power connectors: 2x10 and 2x2-pin
Graphics power connector: 6-pin
Other connectors: 4x SATA, 2x Molex, 1x Floppy
|Operation System||This system comes without operating system.
It is compatible with Windows 10 / 8.1 / 7 and Linux.- 64 bit.
Note on Windows 7 see 
|Processor support||Socket LGA 1151 (H4) supports the sixth generation of
Intel Core i7 / i5 / i3, Pentium and Celeron processors
Maximum supported processor power consumption (TDP) = 95W
Codename "Skylake", 14nm process technology, up to 8 MB of L3 cache
Not compatible with Intel Xeon E3 V5 processors with Socket LGA1151 and processors with the older Socket LGA 1150.
Does not support the unlock-function of Intel K-Series processors.
The processor integrates PCI-Express, memory controller
and the graphics engine on the same die (performance features
depending on processor type)
Please refer to the support list for detailed processor support information at global.shuttle.com.
|Processor cooling||Shuttle I.C.E. (Integrated Cooling Engine)
Advanced I.C.E. Heatpipe technology with 3 pipes
Temperature controlled 92 mm fan
SilentX cooling and noise reduction technology with Active Airflow
|Memory support||4 x 288-pin slots
Supports DDR4-2133 memory (PC4-17066) at 1.2V
Supports 2+2 Dual Channel mode
Supports max. 16 GB per DIMM, maximum total size of 64 GB
|PCIe Expansion Slots||1x PCI-Express x16 v3.0 slot (PEG, for graphics cards only)
1x PCI-Express x4 v3.0 slot
This XPC supports dual-slot (double-width) graphics cards -
in this case the second PCI-Express slot will be occupied.
Graphics power connector: 6-pin
|M.2 SSD slot||The M.2 2280 BM slot provides the following interfaces:
- PCI-Express Gen. 3.0 X4 with up to 32 Gbps Data Transfer Speed
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SSDs with SATA or PCI-Express interface
|Mini PCIe Slot||Mini-PCIe Half-Size slot
with PCIe 2.0 and USB 2.0 interface
supports one optional Wireless Network (WLAN) card
|Integrated Graphics||The features of the integrated Intel HD graphics function
depend on the processor type used.
Supports DirectX 12, OGL 5.x, OCL 2.x
The PC features three digital video outputs :
- HDMI v1.4 (supports 1080p/60 and 2160p/30)
- 2x DisplayPort v1.2 (support 1080p/60 and 2160p/60)
Supports displays with 4K Ultra HD resolution at 3840 x 2160 
Supports three independent FullHD displays with the integrated graphics function
Supports more displays in combination with a discrete graphics card 
Supports Blu-ray (BD) playback with HDCP content protection
Supports multi-channel digital audio over the same cable
Maximum shared memory of 512 MB
|7.1-Channel HD audio||7.1 channel High Definition Audio with Realtek ALC892 codec
Analog: line-out (7.1-ch), line-in, microphone, AUX input (onboard)
Digital Audio via HDMI and DisplayPort outputs
|Gigabit LAN||Intel i219LM PHY connected to the MAC of the processor
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
|SATA connectors||The mainboard provides six Serial-ATA 3.0 interfaces, max. 6 Gbps supported
4x Serial ATA connector onboard
1x External Serial ATA (eSATA) connector at the back panel
1x M.2 slot onboard for flash memory cards
Supports Intel Rapid Storage Technology (RST, Raid 0/1/5/10, JBOD)
|Front Panel connectors and buttons||Microphone input
Headphone output (line-out)
2x USB 3.0
2x USB 2.0 (1x Fast charge port with up to 2A) 
Power indicator (blue LED)
Hard disk drive indicator (yellow LED)
|Back Panel connectors||HDMI v1.4
2x DisplayPort v1.2 
6x USB 3.0
GigaBit LAN (RJ45)
External Serial ATA (eSATA 6 Gb/s)
7.1-ch Audio line-out (2x rear/front, bass/center, surround/back)
Clear CMOS button
Optional: serial port RS-232 (Accessory: H-RS232)
3x perforation for optional WLAN antennas
|Other Onboard Connectors||2x USB 2.0 (2x 5-pin)
1x RS232 (2x 5-pin) for optional accessory H-RS232
2x fan connectors (4 pin), one connector is occupied
Low Pin Count header (LPC, 2x 10 pin, 2 mm pitch size)
Occupied front connectors: USB 3.0, USB2.0, audio, power buttons, LEDs
|Included Accessories||Multi-language XPC Installation Guide (EN, DE, FR, ES, JP, KR, SC, TC)
32/64-bit driver disk
2x Serial ATA cables
AC Power Cord (with protective-earth contacts)
Protector cap for the CPU socket (do not use if heat-pipe or fan is mounted)
Bag with screws
|Optional Accessories:||PHD3: 3.5" to 2.5" adapter
H-RS232: Backpanel COM port adapter for RS232 serial interface
WLN-C: Wireless LAN 802.11n module with external antennas
PC63J: 500W power supply, 80 PLUS® Silver
|Environmental Specifications||Operating temperature range: 0~35°C
Relative humidity range: 10~90% (non-condensing)
|Certifications / Compliance||EMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI
Other: RoHS, ErP 2013 Lot 3, Energy Star 5.2
|Conformity||This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
the living room or office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
|Footnotes:|| Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the settings in the BIOS or using third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held responsible for possible damage caused by overclocking.
 Supports additional displays in combination with a discrete graphics card
The integrated graphics function already supports three independent displays via its digital video outputs. This PC can even support more displays in combination with a discrete PCI-Express graphics card. This function is based on the Switchable Graphics feature introduced with the 2nd Generation of Intel® Core™ processors. To enable this, please enter the BIOS Setup Utility by pressing the "Delete" key after powering on the PC, then go to the "Advanced" tab and change the "Initiate Graphics Adapter" setting to "Switchable".
 4K Ultra-HD resolution
A 4K-display with Ultra-HD resolution (3840 x 2160) should be connected via DisplayPort, as only this port supports a higher refresh rate of 60Hz. The video playback performance depends on the video format, bitrate and the processor used. Daily office applications usually won't require the system to run under full load, however for smooth 4K (2160p) video playback requirements are different. An Intel Core i3 processor or higher is required here.
 Right Front USB port with Fast-Charge feature
Fast charge Apple iPhone/iPad devices with up to 2A under Windows (not under Linux).
 How to convert DisplayPort to HDMI/DVI
The DisplayPort outputs can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
 Three independent displays simultaneously
The Shuttle XPC cube Barebone SH170R6 supports a maximum of two displays with a DVI or HDMI input. A third digital display, if required, must be connected directly to the DisplayPort output (without an adapter).
 Installation of Windows 7
Intel® 100 chipset series has removed their support for the Enhanced Host Controller Interface (EHCI) which is the driver software for the USB 2.0 ports. The new chipset only supports the updated Extensible Host Controller Interface (xHCI for USB 3.0) which is not supported by the original Windows 7 installation disk. This means, that peripheral devices connected by USB (like keyboard, mouse and external optical drive) do not work during the Windows 7 Installation. As a solution please add the required USB 3.0 drivers to the Windows 7 installation files - this procedure is explained in the Shuttle FAQ section at global.shuttle.com.