Shuttle SZ270R8

En stærk PC til krævende arbejdsopgaver eller gaming på seriøst plan.

SZ270R8 har et stilfuldt aluminiums-kabinet som er mindre end et almindeligt pc-tower. Imponerende udvidelsesmuligheder og stor lagerkapacitet. Med et fremragende internt design kan SZ270R8 understøtte dual-slot grafikkort og der kan installeres op til fire 3,5″ harddiske. Understøtter Intel Rapid Storage Technology (Intel RST).

High-end Mini-PC with Intel Optane technology

Experience the Intel Optane technology that significantly speeds up the XPC Barebone SZ270R8. Thanks to new 3D Xpoint memory, the PC will feel noticeably more responsive. Waiting times are reduced even further and the operating system as well as the programs installed start faster. In combination with the latest Intel Core processors, up to 64 GB of DDR4 memory, four hard drives and a dual-slot graphics card, particularly impressive performance is attainable. Ideal for professional applications or serious gaming.


Se alle specifikationer her


Shuttle XPC cube Barebone SZ170R8 - Specifications

R8-Chassis Black aluminium chassis
Front panel: brushed aluminium
Front doors for USB ports
Kensington Security Slot at the back panel (also called K-Slot
or Kensington lock) as a part of an anti-theft system
Dimensions: 33.2 x 21,6 x 19.8 cm (LWH), 14.2 litre
Weight: 3.5 kg net / 5.0 kg gross
Storage Bays Storage bays: 4 x 3.5" (internal)
Using the optional accessory PHD3 two 2.5" drives
can be installed into one 3.5" bay.
Mainboard and Chipset Shuttle "FZ170", Shuttle Form Factor
proprietary design for XPC cube Barebone SZ170R8
Dimensions: 270 x 195 mm
Chipset: Intel® Z170 Chipset
(Intel® GL82Z170 PCH, code name "Sunrise Point")
Platform Controller Hub (PCH) as Single-Chip-Solution
Solid Capacitors for sensitive areas provide excellent
heat resistance for enhanced system durability
BIOS AMI BIOS, SPI Interface, 32 MBit Flash-ROM with SPI interface
Supports PnP, ACPI 3.0, Hardware Monitoring
Supports Unified Extensible Firmware Interface (UEFI)
Supports boot up from external USB flash memory
Power Supply Built in 500 Watt mini switching power supply (PC63J)
AC input voltage: supports 100~240V, 50~60 Hz
80 PLUS Silver compliant: the PSU provides at least
85/89/85% of efficiency at 20/50/100% of load.
Active PFC circuit (Power Factor Correction)
ATX main power connectors: 2x10 and 2x2-pin
Graphics power connector: 6-pin and 8-pin
Other connectors: 4x SATA, 2x Molex, 1x Floppy
Operation System This system comes without operating system.
It is compatible with Windows 10 / 8.1 / 7 and Linux.- 64 bit.
Note: Windows 7 and 8.1 is only supported in combination with the 6th generation Intel
Core processors "Skylake".
Additional note on Windows 7 see [7]
Processor Support Socket LGA 1151 (H4) supports
Intel Core i7 / i5 / i3, Pentium and Celeron processors
- 6th generation, code name "Skylake"
- 7th generation, code name "Kaby Lake" [8]
Maximum supported processor power consumption (TDP) = 95W
14nm process technology, up to 8 MB of L3 cache
Not compatible with Intel Xeon E3 V5 processors for socket LGA1151 and processors
with the older Socket LGA 1150.
Supports the unlock-function of Intel K-Series processors.
The processor integrates PCI-Express, memory controller
and the graphics engine on the same die (performance features
depending on processor type)
Please refer to the support list for detailed processor support information at
Processor Cooling Shuttle I.C.E. (Integrated Cooling Engine)
Advanced I.C.E. Heatpipe technology with 4 pipes
Temperature controlled 92 mm fan
SilentX cooling and noise reduction technology with Active Airflow
Memory Support 4 x 288-pin slot
Supports DDR4-2133 memory (PC4-17066) at 1.2V
Supports 2+2 Dual Channel mode
Supports max. 16 GB per DIMM, maximum total size of 64 GB
Integrated graphics The features of the integrated Intel HD graphics function
depend on the processor type used.
Supports DirectX 12, OGL 5.x, OCL 2.x
The PC features three digital video outputs [6]:
- HDMI v1.4 (supports 1080p/60 and 2160p/30)
- 2x DisplayPort v1.2 (support 1080p/60 and 2160p/60)
Supports displays with 4K Ultra HD resolution at 3840 x 2160 [3]
Supports three independent Full HD displays with the integrated graphics function
Supports more displays in combination with a discrete graphics card [2]
Supports Blu-ray (BD) playback with HDCP content protection
Supports multi-channel digital audio over the same cable
Maximum shared memory of 512 MB
PCIe Expansion Slots 1x PCI-Express x16 v3.0 slot (PEG, for graphics cards only)
1x PCI-Express x4 v3.0 slot
This XPC supports dual-slot (double-width) graphics cards -
in this case the second PCI-Express slot will be occupied.
Graphics power connector: 6-pin
M.2 SSD Slot The M.2 2280 BM slot provides the following interfaces:
- PCI-Express Gen. 3.0 X4 with up to 32 Gbps Data Transfer Speed and NVMe support
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SSDs with SATA or PCI-Express interface
Mini-PCIe Slot Mini-PCIe Half-Size slot with PCIe 2.0 and USB 2.0 interface
supports one optional Wireless Network (WLAN) card
7.1 Channel Audio 7.1 channel High Definition Audio with Realtek ALC892 codec
Analog: line-out (7.1-ch), line-in, microphone, AUX input (onboard)
Digital Audio via HDMI and DisplayPort outputs
Gigabit-LAN Controller Intel i219LM PHY connected to the MAC of the processor
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
SATA Connectors The mainboard provides six Serial-ATA 3.0 interfaces, max. 6 Gbps supported
4x Serial ATA connector onboard
1x External Serial ATA (eSATA) connector at the back panel
1x M.2 slot onboard for flash memory cards
Supports Intel Rapid Storage Technology (RST, Raid 0/1/5/10, JBOD)
Front panel Connectors and Buttons Microphone input
Headphone output (line-out)
2x USB 3.0
Power button
Power indicator (blue LED)
Hard disk drive indicator (yellow LED)
Back Panel Connectors HDMI v1.4
2x DisplayPort v1.2 [5]
6x USB 3.0
GigaBit LAN (RJ45)
External Serial ATA (eSATA 6 Gb/s)
7.1-ch Audio line-out (2x rear/front, bass/center, surround/back)
Audio Line-in
Clear CMOS button
Optional: serial port RS-232 (Accessory: H-RS232)
3x perforation for optional WLAN antennas
Other Connectors (onboard) 2x USB 2.0 (2x 5-pin)
1x RS232 (2x 5-pin) for optional accessory H-RS232
2x fan connector (4-pin), one connector is occupied
Low Pin Count header (LPC, 2x 10-pin, 2 mm pitch size)
Occupied front connectors: USB 3.0, USB2.0, audio, power buttons, LEDs
Included Accessories Multi-language XPC Installation Guide (EN, DE, FR, ES, JP, KR, SC, TC)
32/64-bit driver disk for Windows
4x Serial ATA cables
AC Power Cord (with protective-earth contacts)
Heatsink Compound
Protector cap for the CPU socket (do not use if heatpipe or fan is mounted)
Bag with screws
Optional Accessories PHD3: 3.5" to 2.5" adapter
H-RS232: Backpanel COM port adapter for RS232 serial interface
WLN-C: Wireless LAN 802.11n module with two external antennas
WLN-P: Wireless LAN 802.11ac + BT4.0 module with two external antennas
Environmental Specifications Operating temperature range: 0~40°C
Relative humidity range: 10~90% (non-condensing)
Certifications Compliance EMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI
Other: RoHS, Energy Star, ErP
This device is classed as a technical information equipment (ITE) in class B and is
intended for use in living room and office. The CE-mark approves the conformity by the
EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage
limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)


Noter [1] Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the settings in the BIOS or using
third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the
components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held
responsible for possible damage caused by overclocking.
[2] Supports additional displays in combination with a discrete graphics card
The integrated graphics function already supports three independent displays via its digital video outputs. This PC
can even support more displays in combination with a discrete PCI-Express graphics card. This function is based on
the Switchable Graphics feature introduced with the 2nd Generation of Intel® Core™ processors. To enable this,
please enter the BIOS Setup Utility by pressing the "Delete" key after powering on the PC, then go to the "Advanced"
tab and change the "Initiate Graphics Adapter" setting to "Switchable".
[3] 4K Ultra HD resolution
A 4K-display with Ultra HD resolution (3840 x 2160) should be connected via DisplayPort, as only this port supports a
higher refresh rate of 60Hz. The video playback performance depends on the video format, bitrate and the
processor used. Daily office applications usually won't require the system to run under full load, however for smoot h
4K (2160p) video playback requirements are different. An Intel Core i3 processor or higher is required here.
[5] How to convert DisplayPort to HDMI/DVI
The DisplayPort outputs can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal -
either DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive
[6] Three independent displays simultaneously
The Shuttle XPC cube Barebone SZ170R8 supports a maximum of two displays with a DVI or HDMI input. A third
digital display, if required, must be connected directly to the DisplayPort output (without an adapter).
[7] Installation of Windows 7
Intel® 100 chipset series has removed their support for the Enhanced Host Controller Interface (EHCI) which is the
driver software for the USB 2.0 ports. The new chipset only supports the updated Extensible Host Controller Interface
(xHCI for USB 3.0) which is not supported by the original Windows 7 installation disk. This means, that peripheral
devices connected by USB (like keyboard, mouse and external optical drive) do not work during the Windows 7
Installation. As a solution please add the required USB 3.0 drivers to the Windows 7 installation files - this procedure
is explained in the Shuttle FAQ section at http://global.shuttle.com/support/faqDetail?faqId=2380.
[8] Kaby Lake processor support
The 7th generation Intel Core processors "Kaby Lake" are supported from BIOS version SZ170000.202. Download
website: http://global.shuttle.com/download/download
Note: If a Kaby Lake processor is used, this XPC will only support Windows 10 and Linux operating systems. Windows
7 and 8.1 will no longer be supported.