X50V6 Black

Shuttle POS X50V6 er et robust all-in-one POS-system med en 39,6 cm (15,6″) stor touchskærm og påloddet Intel Celeron 3865U processor. Det svarer til en IP54-beskyttelsesart og dermed til beskyttelse mod store mængder støv- og vandsprøjt. Den kan anvendes med Windows- og Linux-kompatibel kassesoftware og egner sig effektivt til betjening af kunder med mindre eller mellemstore virksomheder indenfor gastronomi og handel.

Med seks USB-porte og fire COM-porte, DIO- og LPT-interface har den tilslutninger nok til en almindelig kasseperiferi som f.eks. fakturaprintere, kundedisplay, stregkodescanner, tastatur og mus.

Endvidere er det muligt at styre to andre skærme via HDMI- og VGA-udgang. Det kunne f.eks. være til reklameindslag og kundeinformationer.

POS X50V6 leverer maksimal driftsikkerhed og indtager positionen som det mest prisfordelagtige alternativ til traditionelle POS-systemer.

Se alle specifikationerne her

Præsentation af X50V6 fra Shuttle

All-in-One PC for POS, POI, Kiosk Applications
The Shuttle XPC all-in-one X50V6 is the latest addition to the X50 Series and is powered by Intel’s Celeron 3865U processor. The all-new 14 nm Kaby Lake architecture helps improve on power consumption and computing power. Thanks to its passive cooling, the system is virtually noiseless, maintenance-free and approved for 24/7 nonstop operation. Particularly suitable for vertical applications is the arrangement of connectors at the bottom and the IP54 compliant front panel which is dust-protected and protected from splashing of water.



Fanless and silent Passive heatpipe cooling, no fan noise at all
Perfect to be used in noise-sensitive environments
Fanless, dust-free and thus virtually maintenance-free
24/7 nonstop operation This device is approved for 24/7 permanent operation.
- Free circulation of air amongst the PC must be guaranteed.
- Ventilation holes must be kept clear.
- If a hard disk is installed, this must also be approved for permanent
operation by its manufacturer.
IP54 protected The front panel is dust-protected and protected from
splashing of water according to protection class IP54.
Chassis Colour: black
Dimensions: 391 x 327 x 42 mm (W x H x D)
100mm VESA mount capable
Mounting hole for Kensington lock
Weight: 3.6 kg net, 4.8 kg gross
Operation System This system comes without operating system.
It is compatible with:
- Windows 10 (64-bit)
- Linux (64-bit)
Touchscreen Touchscreen function supports fingertip input
Resistive 5-wire single-touch technology
Stylus for the touchscreen included
39.6cm display (15.6") 39.6 cm / 15.6" LCD display, ratio: 16:9 widescreen panel
Resolution: 1366 x 768 = 1.05 Megapixel
Backlight unit: High power LED, Luminance: 220 cd/sqm
Glass thickness: 0.5 mm
Processor Model: Intel Celeron 3865U (ULV)
System-on-a-chip architecture (SoC): no chipset required
BGA1356 package - directly soldered onto the mainboard
Code name: Kaby Lake-U (7th Generation Intel Core)
Cores / Threads: 2 / 2, Clock rate: 1.8 GHz
L1/L2/L3 Cache: 128 kB / 512 kB / 2048 kB
Memory controller: DDR4-2133 Dual Channel (1.2 V)
TDP wattage: 15 W maximum
Manufacturing process: 14 nm
Maximum Tjunction Temperature: 100 °C
Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
Integrated graphics engine
Integrated Graphics Intel HD Graphics 610
GPU clock frequency: 300~900 MHz
Execution Units (EUs): 12
Supports DirectX 12
Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
Supports Quick Sync Video and Clear Video HD technology
Up to three displays simultaneously Two video ports support two additional independent screens:
1) HDMI 1.4 supports 1920 x 1080 @ 60 Hz or 3840 x 2160 @ 30 Hz
2) VGA / D-Sub analog video supports 1920 x 1080 @ 60 Hz
Special conditions for operation in Multi-Monitoring mode:
1) Clone mode: all displays show the same content at 1366 x 768 resolution
2) Extended mode: all displays show different content
BIOS AMI BIOS in 8 MByte EEPROM with SPI interface
Supports Power fail resume / always on
Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
Supports hardware monitoring and watch dog functionality
Supports Firmware TPM v2.0 functionality
Memory support 2x SO-DIMM slot with 260 pins
Supports DDR4-2133 (PC4-17000) SDRAM at 1.2 V
Supports Dual Channel mode
Supports a maximum of 16 GB per DIMM, maximum total size: 32 GB
Supports two unbuffered DIMM modules (no ECC or registered)
Storage Supports one SATA hard disk or one SATA SSD drive in 6.35 cm /2.5" format
The SATA 3.0 interface supports up to 600 MB/s data transfer speed (6 Gbit/s).
Supports one drive with up to 12.5 mm in height
M.2-2280 Slot The M.2 2280 BM slot provides the following interfaces:
- PCI-Express Gen. 3.0 X4 with up to 32 Gbps Data Transfer Speed
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key)
Card Reader Integrated card reader supports SD, SDHC and SDXC memory flash cards
Webcam Integrated 2.0 Megapixel (1600x1200) HD webcam
Microphone and speakers Front panel with integrated Electret Condenser Microphone and
2x 2W speakers
Audio Realtek ALC269 Audio Codec
Two analog audio connectors (3.5 mm) on the bottom side:
1) Line-out (headphones)
2) Microphone input
Digital Audio is supported via HDMI.
Wired network Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL) from S3, S4 modes
Supports network boot by Preboot eXecution Environment (PXE)
Wireless Network (WLAN) WLAN chip: Realtek 8188EE
Supports IEEE 802.11b/g/n for 2.4 GHz band
Speed: max. 150Mbps up-/downstream
Security: WPA/WPA2, WEP
M.2-2230AE card with internal antenna
Front LEDs Power LED (blue)
Hard disk LED (orange)
Connectors left side Power button
2x USB 2.0
SD card reader
Hole with power button
Hole with Clear CMOS button
Connectors bottom side HDMI 1.4 (supports digital video and digital audio)
2x USB 3.0
2x USB 2.0
Gigabit Network (LAN, RJ45)
Audio Line-out /head phone (3.5 mm jack socket)
Microphone input (3.5 mm jack socket)
DC input for external power adapter (5.5 / 2.5 mm)
Perforation for optional TV/3G antenna (diameter: 9 mm)
Optional: 2x COM/serial (RJ45), DIO (RJ11) for cash drawer (assessory POS01)
Connectors back side HDMI 1.4 (supports digital video and digital audio)
2x USB 3.0
2x USB 2.0
Gigabit Network (LAN, RJ45)
Audio Line-out / headphones (3.5 mm jack)
Microphone input (3.5 mm jack)
DC input for external power adapter (5.5 / 2.5 mm)
Perforation for optional TV/3G antenna (diameter: 9 mm)
Optional: 2x COM/serial (RJ45), DIO (RJ11) for cash drawer (accessory POS01)
Connectors rear side VGA connector (D-Sub 15 pol., analog video)
Optional: 2x COM/serial (D-Sub), 1x LPT/parallel (accessory: PCL71 or POS01)
Connectors onboard Internal USB 2.0 type A connector for a USB stick
Serial ATA (6 Gbps)
Serial ATA power connector
3x USB 2.0 header (all occupied)
eDP connector (Embedded DisplayPort) - occupied by the display
Connector for optional COM/LPT adapter POS01 or PCL71
Power Adaptor External 65 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 3.42 A, max. 65 W
DC input DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports an external
power source with either 12V±5% or 19V±5%.
Included Accessories Quick Guide
Driver DVD
External Power Adapter (65W / 19V) with Power cord
Serial ATA cable for the 2.5" drive
Optional Accessories PCL71: COM / LPT adapter:
- 1x Parallel (25p D-Sub)
- 2x Serial RS232 (9p D-Sub) supports 0 / 5 / 12V
POS01: COM / LPT adapter:
- 1x Parallel (25p D-Sub)
- 2x Serial RS232 (9p D-Sub) supports 0 / 5 / 12V
- 2x Serial RS232 (8p RJ45)
- 1x DIO/RJ11 connector for cash drawer supports 12 / 24V
PF55: Carrying bag
Environmental Spec Operating temperature: 0~40°C
Humidity: 10~90%
Certification and Compliance EMI: CE, FCC, BSMI
Safety: CB, BSMI, ETL
Other compliances: RoHS, ErP Lot6, Energy Star v5.0
Conformity This device is classed as a technical information equipment (ITE) in class B and is
intended for use in living room and office. The CE-mark approves the conformity by the
EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage
limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP),
(4) 1999/5/EC related to Radio and Telecommunications Terminal Equipment (R&TTE)